Gilera Nexus 500. Changing the oddometer display to show miles (mph). Re-setting service icons.

Three buttons on the instrument panel. Mode, Clock and Odo / Set. Clock.

Changing the oddometer display to show miles.
1. Press and hold the Mode and Clock buttons.
2. Turn on the ignition.
3. Hold buttons down for at least three seconds and the display will change

Service icons.
There are two icons on the display to remind the owner that certain servicing is due. These icons are controlled by elapsed mileage and elapsed time so it is important to set the date and time correctly.

SERVICE: Comes on after first 1000km and then after every 6000km. This light also comes on after one year even if the distance has not been covered.
BELT: Comes on after every 12000km.

Re-setting service icons.
If one or both of the service icons is flashing follow this procedure:

Press "MODE" and "ODO/SET" buttons at the same time. Keep pressing the buttons and turn on the ignition, after about 3 seconds, the two icons icon will light. Release the buttons.
Press the “MODE” button briefly (for less than 1 second) to select the icons in a sequence. The selected icon must turn on with a solid light.
Press the “MODE” button for more than 3 seconds to reset the selected icon;

Note that the “SERVICE” function also resets the date.